Are you wondering how to assemble your Traeger Ridgeland 572 grill but can't find a perfect solution? So stay tuned and take a good look at our review. Here we show you how to assemble your Traeger Ridgeland 572 grill without any hassle.
Moreover, the first thing we all do after buying a new grill is how to put it together. And we can't do that because many of us don't know it well. Moreover, it is very important to assemble the grill for perfect cooking because if it is not done properly you will not be able to cook properly and it will not be enjoyable for you. But assembling this Traeger Ridgeland 572 is not a difficult task. But you have to remember that you have to be careful to get the job done. And the work must be done according to the proper instructions.
Another important thing is to know about this grill and to see the difference with other grills you can see the comparison of Traeger Ridgeland 572 vs pro 22.
How Do You Assemble A Traeger Ridgeland 572?
Now we will give you some instructions to assemble Traeger Ridgeland 572. And we will discuss that in detail. Which will make your job easier for you. So follow our instructions well and act accordingly. So let's start now without delay.
Install the grill legs
First, you attach the legs of your grill. To do this you need to assemble a bolt socket head and a washer, leg, other washers, a spring washer, and all the instruments protected with hex nuts. And keep repeating this bonding process for its other wheeled legs. Attach the rest of the legs without the wheel to the grill. Assemble your grill legs in this order.
Fix leg braces
To do this you attach the leg brace to the foot using four of the bolts. Attach another leg brace to the rest of the leg using four of the bolts. And take someone else’s help, and turn the grill over so that it stays to the right. Be sure to ask someone to help you with the task at hand, as this will make your job easier or cause an accident. So we advise you to do it carefully.
Attach the smokestack and chimney cap
Accumulate the smoke. Connect the smokestack with brace bolts, two seats and adjust them with two hex nuts. Put on the chimney cap.
Install the side lift handle
At this stage, you remove the packaging and parts from the inside of the grill. Then locate the handle and attach it to the side of the grill with bolts, two washers, and two mica washers.
The Bottom Line
Hopefully, by now you have figured out how to assemble your Traeger Ridgeland 572 grill. So assemble your grill now to enjoy your grilling to the fullest and follow our instructions for it well. And be sure to take the help of others and be careful when doing the work.
Because the grill is heavy enough. And make sure that all the parts are well connected so that you can avoid accidents and cook comfortably easily. So get ready now to do your job without delay.
0 Comments